21st June 2013
As I mentioned in an earlier post I added a few craft-y touches to our engagement party and here’s one of them- my D.I.Y Cake Stand. I’m rather proud of my stand and loved the fact no one could tell that it was made from a lampshade, 3 plastic plates and 2 wine glasses.
I didn’t take pics as I made the stand (DOH!) so I don’t have the best step-to-step pic guide but hopefully my commentary will be clear enough.
I bought three different sized plastic plates, a set of wine glasses (used two) and a two tiered lamp shade all for £40 from TKMaxx (TKMaxx home-wares section is fab)
Yep, here’s the lampshade- it was originally a two tiered lampshade- I cut off the smaller tier so only this big base was left. (make sure you buy the right size plate to fit onto your lampshade base.) I then cut out the beads from the smaller discarded lampshade tier and kept them to one side.
Using a glue that bonds glass to plastic, I glued the wine glasses upside down in the centre of the plates. Once all layers were glued together, I glued a strip of draught excluder (you’ll find this in a hardware shop and use the 1cm wide excluder) around the bottom edge of the top and middle plate. I left the glue to dry overnight and then sprayed the stand with two coats of primer and then two coats of metallic finish silver paint.
Using some florists wire I had (cut to approx 8cm long) I bent the wire into a U shape, threaded the beads I’d kept aside and stuck them through the draught excluder in even intervals. You don’t have to do this last step but I do think it finishes off the look.
Hope you liked! the tutorial
Follow me on Facebook and Twitter!